SAVV AVH-DDM101P - Manual (Page 9)

9 9
Music Mode
A2DP
A2DP is short for Advanced Audio Distribution
Profile. The mobile phones supporting this
function can transmit stereo audio, whereas
the ones not supporting this function can
transmit mono audio only.
— — — — — — — — — — — — — — — — — — — —
General Notes for Bluetooth ®
1. For some types of mobile phones, during
our test, after the mobile phones appear
connection successful, the unit still appear
waiting for pairing. At this time you must
find the unit’s Bluetooth ® module name
“inCarBite” on the pairing list on your
mobile phone and select connecting in
the submenu, then the unit will appear
CONNECT. Otherwise, there is no voice
coming out when communicating, though
the mobile phone has already displayed
CONNECT. Some mobile phones, when
it play back A2DP, you must find the unit
name in the phone’s menu and reconnect
(check your mobile phone whether has the
A2DP & AVRCP functions).
2. When pairing, some types of mobile phone
hint that how to operate, for example, when
you make a phone call by the unit, if the
mobile phone voice dosn’t be transferred to
the unit, no voice comes out.
3. Depending on the mobile phone, if private
mode is selected, when you make a phone
call by the unit, or receive, the voice would
be transferred to the mobile phone. But
sometime the Bluetooth ® maybe disconnect
till the communication ends, then connects
your mobile phone to the unit automtically.
Some mobile phones maybe need pair
again.
4. For mobile phone, the Bluetooth ® device
name must be primary symbols or numbers.
Otherwise, some unpredictable issues
may occur during the Bluetooth ® devices
connecting and making phone call.
5. After CONNECT, if no sound produced,
please check whether the Bluetooth ® stereo
audio on the phone switched ON.
Bluetooth ® Operation
Press [ MENU ] button to enter system menu,
then each press changes the mode as follows:
— — — — — — — — — — — — — — — — — — — —
TA mode
Rotate the knob to choose TA ALARM or
TASEEK mode.
If the TA (Traffic Announcements) is turned on
a n d t h e r e i s n o t r a f f i c p r o g r a m
identificationcode received in the specified
time, no TA/TP will display and either TA
ALARM or TA SEEK will be activated.
TA ALARM mode : Alarm is turned on.
TA SEEK mode: TA SEEK is automatically
activated.
— — — — — — — — — — — — — — — — — — — —
AF ON/OFF
Rotate the knob to choose AF on or off.
— — — — — — — — — — — — — — — — — — — —
REG ON/OFF
Rotate the knob to choose REG on or off.
— — — — — — — — — — — — — — — — — — — —
TA VOL mode
Rotate the knob to choose TA volume.
— — — — — — — — — — — — — — — — — — — —
RETUNE mode
RETUNE mode: Rotate the knob to choose
System Menu