Sceptre SB301524 - Manual (Page 6)

- 6 -
www.SCEPTRE.com
Sound Bar 2.1 User Manual
Package Contents

Sound Bar x 1

User Manual x 1

Warranty Card x 1

Drywall Anchor with Screw x 2 Sets

3 Head RCA Audio Cable x 1

3.5 mm Mini-jack Cable x 1

Sound Bar Remote Control with lithium CR2025 battery x 1
Overviews
Front & Back
1. WALL MOUNT BRACKETS – Use these brackets to hang the sound bar on a wall.
2. POWER CABLE – Connect this to a surge protector or wall outlet.
3. COAXIAL SPDIF – Connect your digital audio outputs to this connection for audio.
4. AUX – Connect your analog audio output to this connection for audio.
5. LINE IN (3.5mm) – Connect the headphone out from any device to this connection for audio.
The following are touch sensor functions on the Sound Bar 2.1 itself.
6.
POWER – This button turns the Sound Bar on or off.
7. SOURCE – This button selects the sound connection between LINE (3.5 mm mini-jack), COAX
(digital) and AUX (analog).
8. SOUND MODE – This button selects all the sound modes (MOVIE, MUSIC, NEWS, GAMES).
a. MOVIE – This sound mode is made for watching movies.
b. MUSIC – This sound mode is made for listening to music broadcasts.
c. NEWS – This sound mode is made for watching the news.
d. GAMES – This sound mode is made for games such as football, soccer, basketball,
and baseball.
9. VOL( –/+) – The (-) touch sensor decreases the volume and the (+) touch sensor increases the
volume.
10. DISPLAY – This screen displays the current status of the sound bar.