Seville Classics EHF10222B - Manual (Page 3)

3
Heater/Fan-Body
BASE-Front BASE-Back
Heater/Fan-Body
SCREWS
Remote Control
A B C
D E
4
STEP 1
Turn the base upside down.
Firmly lock the BASE-front onto the BASE-back by aligning the four holes onto
the four posts.
Fan Assembly
STEP 2
Remove the 4 Fan-Body SCREWS from the center post on the bottom of the FAN - body .
C B
D A
(Gold Screws)
Parts List
SUGGESTION:
When attaching the base to the bottom of the fan, place the TOP PACKING block from the top
of the box on the floor upside down. Then, place the top of the fan into the FOAM PACKING
block to secure the top of the fan from moving while attaching the bottom base. This will give
you a more secure platform for assembly and better protect the top of the fan.
A