Seville Classics EHF10222B - Manual (Page 5)

8 7
Heater Speed Selection:
There are 3 settings: Auto , Low and High . Press to switch between the
power settings
Control Panel
Adjusting the heater temperature: The system will default to Auto mode.
Press the – / + key, to adjust the temperature of the heater.
Remark:
Celsius/Fahrenheit Conversion
Under working mode, press both and either – or + for 2 seconds, the temperature
unit will be converted between Celsius and Fahrenheit. This setting will be memorized
once the unit is powered off. For this setting to be memorized, the remote control will
also need to be programmed or it will automatically convert to the remote pre-setting.
See remark on page 8.
Oscillating Selection:
Pressing the button will start & stop the oscillation of the fan.
Remote Control
ON/OFF: Turns power ON & OFF
(10 second air blow after shut down)
Setting the Timer: There are 48 total settings. The time can be set
in 1/2 hour increments with each push of the button. 1/2 hour, 1
hour, 1-1/2 hour, 2 hours, up to 24 hours. To set the timer, hold
down the button for 2 seconds, then add or reduce time on the
clock.
- +
- +
- +
Oscillating Selection: Pressing the
button will start & stop the oscillation of
the fan.
HEATER MODE FAN MODE
Heater/Fan Control Panel Modes
High
Low Medium ECO
Heater Speed Selection: There are 3 settings: Auto , Low and High .
Press to switch between the power settings
Adjusting the heater temperature: The system will default to Auto mode.
Press the – / + key, to adjust the temperature of the heater.
Remark:
Celsius/Fahrenheit Conversion
Under working mode, press both and either – or + for 2 seconds, the
temperature unit will be converted between Celsius and Fahrenheit. This
setting will be memorized once the unit is powered off.
If “E3” appears on the LCD display, eliminate any obstacles near the
back air inlet grille. Unplug the heater fan for 10-20 minutes (until cool),
then plug back in to resume use.
Fan Mode
Time Duration
Oscillating
Timer
ECO / LOW / MEDIUM / HIGH
Time Duration Timer Temp Heat Mode
Oscillating LOW / HIGH / AUTO