SIG SAUER SSG 3000 - Manual (Page 55)

www.sigsauer.com 55
11.2 Installing the mirage band
CAUTION! The mirage band is only loosely connected with the Rifle. May lead to injuries and damage to the
Rifle. Keep the Rifle pointed in a safe direction in order to prevent the mirage band from injuring persons or
damaging property if it slips unintentionally.
See Figure 24.
1. Insert the twin claws of the mirage band hook into the hole of the upper central slots of the flash suppressor.
2. Stretch the mirage band to the rear and slip hook onto the forward scope mount.
11.3 Removing the mirage band
CAUTION! The mirage band is only loosely connected with the Rifle
May lead to injuries and damage to the Rifle. Keep the Rifle pointed
in a safe direction in order to prevent the mirage band from injuring
persons or damaging property if it slips unintentionally.
1. Remove the hook of the mirage band from the forward scope rail mount
and relax the mirage band (see Figure 24 top).
2. Unhook the twin claws of the mirage band hook from the holes of the
upper central slots of the flash suppressor (see Figure 24 below).
14SIG1027_OM-SSG3000-USA_MiniManual_PeaseREV05.indd 55 3/27/14 11:17 AM