SIG SAUER SIGM400 Rifle - Manual (Page 19)

when it counts ™
www.sigsauer.com 19
8. Do not oil cartridges, and be sure to wipe the chamber clean of any oil or preservative before commencing to shoot. Oil
interferes with the friction between cartridge case and chamber wall that is necessary for safe functioning, and subjects
the firearm to stress similar to that imposed by excessive pressure.
9. Use lubricants sparingly on the moving parts of your firearm. Avoid excessive spraying of any aerosol gun care product,
especially where it may get on ammunition. All lubricants and aerosol spray lubricants in particular can penetrate
cartridge primers and cause misfires. Some highly penetrative lubricants can also migrate inside cartridge cases and
cause deterioration of the propellant powder; on firing, the powder may not ignite. If only the primer ignites, there is
danger that the bullet may become lodged in the barrel.
11SIG455_M400MiniManual.indd 19 8/2/11 3:58 PM