Compaq 3200 - Manual (Page 205)

Index-3
Compaq Smart Array 3200 Controller Reference Guide
Writer: Rebecca Wiggins Project: Compaq Smart Array 3200 Controller Reference Guide Comments: 340862-002
File Name: R-INDX.DOC Last Saved On: 12/7/98 2:14 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
diskettes, creating, ROMPaq 3-1
distributed data guarding
See RAID 5
distributing data, defined E-11
Documentation Diskette 6-27, 6-29
DOS FDISK 6-8
DOS partition, files 6-9
DOS partitions 6-8
drive arrays
benefits E-5
changing configurations 1-6
characteristics E-3
choosing a controller, illustrated
5-6
creating a new array 5-5
creating logical drives 5-10
defined 1-6, E-1
examples E-2
grouping physical drives of same
size 5-7
illustrated E-1
performance enhancement E-11
drive failure
features E-23
RAID 0 H-2
RAID 1 H-2
recognizing H-1
recovering from H-1
replacing a failed drive H-3
spare drive H-3
drive mirroring See RAID 1
drive movement 1-8
drive parameter tracking E-23
drivers
installing from Novell SSD 6-5
installing, materials needed 6-2
standard Windows NT installation
methods 6-20
updating 1-8, 6-2
drives See SCSI hard drives
configured for fault tolerance,
recovering 6-10
configured for no fault tolerance,
recovery 6-13
disk drive failures, steps 5-35
failed, lost data 2-7
handling disk drive failures 6-7
maximum per server 2-3
planning considerations 2-1
supported by Smart Array 3200
Controller 2-1
dual to single channel, error message
2-9
duplexing, controller E-27
E
ECC memory E-15
Array Accelerator 1-4, E-15
defined 1-4
enter, instructions xi
error and warning messages 5-29
Error Checking and Correcting (ECC)
memory See ECC memory
European Union Notice A-4
expand priority 5-24
external connections 1-1
external connectors, illustrated 1-3
F
failed drive 5-34
FAQs, Frequently Asked Questions
J-1
Fast-SCSI-2, defined 1-8
Fast-Wide SCSI-2
defined 1-8
Fast-SCSI-2 compatibility 1-8