SilentKnight IP Communicator - Manual (Page 3)

IP Communicator Series Installation Document — P/N 53109:I 4/26/2010 3
The following models are to be used with the IPDACT Series for retrofit applications only.
IFP-50 / IFP-50VIP 2 IPENC Enclosure Section 2.2 on page 10
5700 2 HP300ULX Enclosure
Section 2.3 on page 12
5700 2 IPENC Enclosure Section 2.2 on page 10
5600 2 HP300ULX Enclosure Section 2.3 on page 12
5600
2 IPENC Enclosure Section 2.2 on page 10
5208 2 HP300ULX Enclosure Section 2.3 on page 12
5208 2 IPENC Enclosure Section 2.2 on page 10
5104
2, 8 HP300ULX Enclosure Section 2.3 on page 12
5104 2, 8 IPENC Enclosure Section 2.2 on page 10
IFP-25 2 HP300ULX Enclosure Section 2.3 on page 12
IFP-25
2 IPENC Enclosure Section 2.2 on page 10
1 The IPDACT is powered by the HP300ULX Power Supply only (not required for the IPDACT-2 and
IPDACT-2UD)
2 This panel is compatible with the IPDACT-2 model only.
3 Provides a complete communicator solution for any fire monitoring application.
4 Use of the UDACT Universal Digital Alarm Communicator/Transmitter is required for this
application. (For more information, see the UDACT Manual #50050.) This panel is only
compatible with the IPDACT-2 model.
5 If the system configuration does not support installation of the IPCHSKIT, use the IPENC enclosure.
6 Use of the DACT-E3 Digital Alarm Communicator/Transmitter is required for this application. (For
more information, see the DACT-E3 Installation Document #9000-0581.) This panel is only
compatible with the IPDACT-2 model.
7 This panel is compatible with the IPDACT-2 and IPDACT-2UD only.
8 This panel must be used with the HP300ULX Power Supply.
Application (Power Source) Mounting Location Refer to Mounting Instruction Section
MS-9600 IPENC Enclosure Section 2.2 on page 10
Unimode 9600 IPENC Enclosure Section 2.2 on page 10
MS-5024 IPENC Enclosure Section 2.2 on page 10
MS-5024UD IPENC Enclosure Section 2.2 on page 10
MS-5210UD IPENC Enclosure Section 2.2 on page 10
SFP-1024 IPENC Enclosure Section 2.2 on page 10
Unimode 5 IPENC Enclosure Section 2.2 on page 10
Unimode 10 IPENC Enclosure Section 2.2 on page 10
NFS-3030(E) 1 FACP Enclosure (IPCHSKIT) 2 Section 2.1.2 on page 6
NFS-640(E) 1 FACP Enclosure (IPCHSKIT) 2 Section 2.1.2 on page 6
NCA 1 FACP Enclosure (IPCHSKIT) 2 Section 2.1.2 on page 6
AM2020/AFP-1010 1 FACP Enclosure (IPCHSKIT) 2 Section 2.1.2 on page 6
System 5000(C) 1 FACP Enclosure (IPCHSKIT) 2 Section 2.1.2 on page 6
System 500(C)
1
FACP Enclosure (IPCHSKIT)
2 Section 2.1.2 on page 6
AFP-300/400
1
FACP Enclosure (IPCHSKIT)
2 Section 2.1.2 on page 6
AFP-200(C)
1 IPENC Enclosure Section 2.2 on page 10
AFP-100(E)
1 IPENC Enclosure Section 2.2 on page 10
XLS140
1
FACP Enclosure (IPCHSKIT)
2 Section 2.1.2 on page 6
XLS-NCA
1
FACP Enclosure (IPCHSKIT)
2 Section 2.1.2 on page 6
IFC-640(E) 1 FACP Enclosure (IPCHSKIT) 2 Section 2.1.2 on page 6
JNCA 1 FACP Enclosure (IPCHSKIT) 2 Section 2.1.2 on page 6
IFC-2020/1010 1 FACP Enclosure (IPCHSKIT) 2 Section 2.1.2 on page 6
Table 2 IPDACT Series Mounting/Wiring Options for Retrofit Applications
Application (Power Source) Mounting Location Refer to Mounting Instruction Section
Table 1 IPDACT Series Mounting/Wiring Options