Snazzy FX MINI-ARK - Manual (Page 5)

CONTROL DIAGRAM:
1. SENSITIVITY: This knob controls how precisely the MINI-ARK follows the input. For quiet sources
(such as passive guitars and basses), this knob should be near or at full.
2. DRY: This is the DRY Signal level. This signal can be switched with the CLEAN/DIRTY switch to be
clean, or a bit more aggressive in nature.
3. OCTAVE LEVEL –The volume of the octave
4. INTERVAL LEVEL-The volume of the interval
(These control the respective volumes for the Octave which is above or below your input, and the
Interval which is above or below your input.)
5. VOLUME: This is the output volume of the BOX.
6. OCTAVE and 8. INTERVAL SWITCHES: These are the two knobs with which you determine the
Octave pitch and the Interval pitch based on the incoming notes.
7. Clean/Dirty switch: This switch simply chooses between clean or a bit of dirt.
9. HOLD: This knob is a volume for yet ANOTHER octave, which is simply a fixed octave below the