Clarity C510 - Manual (Page 15)

Boost function will be by default ON –
every time a call starts, the Boost func-
tion is active.The Boost function will
default to ON every time the phone
hangs up, regardless of the previous
state of the button.When the switch is
in OFF position, the Boost function is by
default OFF every time a call starts, the
button will not illuminate, and the Boost
function will reset to OFF every time
the phone hangs up. During a call, the
BOOST function can be toggled
ON or OFF using the BOOST button,
regardless of the state of the BOOST
switch.
Ringer Controls
The Clarity t features an extra loud
ringer that can be tailored to the users
needs.
Ringer Volume
Can be set to one of eight (8)
positions by pressing the RINGER
VOLUME UP or DOWN switch
located on the right side of the
telephone.The ringer settings can
be checked without making the
ringer sound by pressing and
holding the BOOST button for three
(3) seconds.The current ringer
settings will be displayed on the LCD.
Ringer Style
Six (6) different styles of ring
cadence or speed are available.
Several of the styles are low
frequency making the sound easier
to hear.To select the ringer settings
press the RINGER STYLE button.
The style of ring will sound
automatically for approximately
two (2) seconds.
Ringer Off/On
The switch turns the ringer ON or
OFF. If the ringer is turned “OFF”
and the Visual Ringer is enabled,
the dial pad will flash and the LCD
will flash “RINGER OFF”.
WARNING: RINGER VOLUME IS
VERY LOUD AND CAN DAMAGE
YOUR HEARING. NEVER PUT YOUR
EAR CLOSE TO THE RINGER.
Operating Your Telephone
14
RINGER STYLE RINGER VOLUME RINGER
OFF/ON