Clarity C510 - Manual (Page 21)

The HANDSET icon will appear on the
LCD to indicate phone is off hook.
Using the Option Function
This feature allows you to add a
long distance access code and/or
area code to numbers or delete an
area code from a number stored
in the Caller ID Memory, thus
allowing you to dial directly
from the Caller ID Memory. For
example: A number appears in
the Caller ID Memory as a ten
(10) digit number and it is neces-
sary to dial one (1) plus area
code and phone number to place
the call. If the long distance
access codes and area codes
are programmed into memory,
then by pressing ENTER/DIAL
while reviewing a CID number the
phone will show the local area
codes and long distance service
codes that can be added. Scroll UP or
DOWN to highlight the desired
code. Pressing ENTER will append
the number and begin dialing.This
function will also allow you to
highlight and remove an area
code from a stored number to
dial the seven (7) digit local
number.
Saving to PhoneBook
1. While reviewing a call in CID mode
press the PROG button once.
The message SAVE-PHONEBOOK
and the PHONEBOOK Icon will
appear.
2. USE ENTER TO END will appear on
screen. Press ENTER to accept and
move to the next screen.
3. NUMBER STORED will appear to
confirm.
4. Press the MODE Button to return to
stand by screen.
Operating Your Telephone
20