Solberg SMConfigurationC(Pg.3-10,11) - Manual (Page 12)

Solberg Manufacturing, Inc., 1151 Ardmore Itasca, IL 60143 USA
Ph: 630.773.1363 Fax: 630.773.0727 Email: [email protected] Web: www.solbergmfg.com
Page 12
5. Removing element for service/maintenance.
A. Carefully remove retaining wing-nut and washer over top plate, and then
remove element.
B. Clean sealing surfaces of housing, top plates and element end caps so
that they are free of dirt or any other particulate.
Figure C.5.3: Element with
pre-filter and gaskets.
Figure C.4.3: Housing top removal.
Lift
Figure C.5.2: Element
sitting in housing base.
Figure C.5.1: Element
top plate removal.