Solberg SMConfigurationC(Pg.3-10,11) - Manual (Page 9)

Solberg Manufacturing, Inc., 1151 Ardmore Itasca, IL 60143 USA
Ph: 630.773.1363 Fax: 630.773.0727 Email: [email protected] Web: www.solbergmfg.com
Page 9
A. Maximum operating temperature for most Solberg inlet air filter products is
220°F / 105°C. Temperatures in excess of this could cause damage to
elements, media and elastomers. High temperature products are
available.
B. Direction of flow is typically from the outside of the element to the inside of
the element. Most products have arrows indicating direction of flow on the
inlet and outlet ports.
C. Ensure that pipe/flange connections are adequately sealed so the
potential for leaks is reduced to a minimum.
2. Removing SpinMeister
™ for service/maintenance.
A. Loosen hose clamp securing SpinMeister ™ to inlet tubes on housing top.
a. To loosen the clamp, use a flat head screwdriver or ratchet and turn
the screw counter clockwise.
Turn
Figure C.2.1: Hose clamp on SpinMeister ™.
Figure C.2.2: Direction to loosen hose clamp.