Solberg Vacuum Discharge Oil Mist Eliminators - Manual (Page 3)

Solberg International, Ltd., 1151 Ardmore Itasca, IL 60143 USA
Ph: +1 630.773.1363 • Fax: +1 630.773.2643 • Email: [email protected] • Web: www.solbergmfg.com
Oil Mist Exhaust Filters • Rev. MA4031103
Page 3
SOLBERG
Section A
INTRODUCTION
The purpose of this manual is instruction on the proper assembly and care of Solberg oil
mist exhaust filters.
! WARNING !
This manual must be read and thoroughly
understood before using and caring for this
exhaust filter. Failure to comply could
result in explosion, product/system
contamination or personal injury.
This manual should be used as a supplement to the user’s understanding of the proper
care needed to maintain a safe and dependable oil mist exhaust filter. It is the
responsibility of the user to interpret and explain all instructions to persons who do not
read or understand English BEFORE they are allowed to maintain and use this exhaust
filter.
This manual should be readily available to all operators responsible for operation and
maintenance of the oil mist exhaust filters.
We thank you for selecting products from Solberg Manufacturing, Inc. We are confident
that our superior filter designs will meet your application requirements.
Section B
GENERAL INFORMATION
1. Identification of Solberg Oil Mist Exhaust Filters.
All Solberg oil mist exhaust filters should have an identification label/nameplate that
gives the following information:
Assembly Model #
Replacement Element #