Solvline PCI - Manual (Page 107)

107
Multi-4JALL+/ISO
Multi-4JALL+/ISO
Multi-4JALL+/ISO board is a model that supports PCI Local Bus Spec 2.3. It is an asynchronous
4 port product designed to automatically set I/O address and IRQ number when ROM bios or
the operating system starts. Unlike former products, Multi-4JALL/PCI VA2 uses core for PCI
Local Bus Spec 2.3 designed by SystemBase. Multi-4 JALL/PCI VA2 not only supports
maximum communication speed of 921.6Kbps but also provides advanced ability to
automatically control IO signals when it is used with driver provided by SystemBase. It is a low
price model equipped with RJ45 connector without external port box and can set different line
interfaces RS232/RS422/RS485 to each port. Also, LED is attached to RJ45 connector to show
the current status of signal lines. Furthermore, it is equipped with surge protector to protect
internal systems from outer shock and all signal lines are connected to 2.5KV Optical Isolation
Protector to have Isolation ability which makes it very useful in industrial fields. Unlike former
products, all information about the board is contained within the board itself so the users can
easily know information such as number of ports currently installed, maximum communication
speed, kind of communication controller and etc.
- Product Specifications
Communication Speed Maximum 921.6K BPS
BUS Interface PCI Local Bus Spec 2.3
Circuit Interface RS232/RS422/RS485 (Selectable for each port)
Communication Controller 16C554 (16-byte TX/RX FIFO)
Connector RJ45
I/O Address Automatic Configuration
IRQ Number Automatic Configuration
Circuit Protection Surge Protector Attached, 2.5KV Optical Isolation Protection
Supported OS Windows 98/2000/NT/XP/2003/Vista/2008/7, SCO UNIX, Linux
Manufacturer SystemBase Co., Ltd.