Multi-32/lpci va1, Product specifications – Solvline PCI User Manual
Page 142
142
Multi-32/LPCI VA1
Multi-32/LPCI VA1
Multi-32/LPCI VA1 is a model that supports PCI Local Bus Spec 2.3, which is designed to set up
I/O address and IRQ number automatically upon starting ROM BIOS and Operating System
without DIP switch to board. In the Multi-32/LPCI VA1, 32 ports only occupy 64 bytes of small
I/O space and there is no limitation of number to be installed as long as slots are available,
which solves a problem of Multi-32/PCI VA1 as it was limited to install maximum 4 units. It
doesn’t have any conflicts between I/O address and Interrupt, which has been a frequent
problem in products ISA. Also, the driver identifies the number of each port box and interface
type automatically; thus easily installation is available. In addition, it is also designed to protect
the system safely from transient-voltage by attaching the surge protector on the TX, RX line.
- Product Specifications
Communication Speed
Maximum 921.6K BPS
BUS Interface
PCI Local Bus Spec 2.3
Circuit Interface
RS232/RS422/RS485
Communication Controller
16C554
Connector
DB25 (Female)
I/O Address
Automatic Configuration
IRQ Number
Automatic Configuration
Circuit Protection
15kV Surge Protector Attached
Supported OS
Windows 98/2000/NT/XP/2003/Vista/2008/7, SCO UNIX, Linux
Manufacturer
SystemBase Co., Ltd.