StarTech.com WIFI2HDMCGE Manual - Manual (Page 29)

Instruction Manual
25
Virtual AP Bridge
Item Description
Virtual AP only Ad-hoc mode
Bridge to Wireless Connect to Internet via Wireless AP router (outlined below)
Bridge to Ethernet Connect to Internet via Wired AP router (outlined below)
Bridge to Wireless connection
1. Change Virtual AP Bridge to “Bridge to Wireless” and click Apply.
2. Click Wireless connection button. The Wireless AP list will display on the screen.
3. Choose the AP you want to connect to.
Bridge to Ethernet / Wired Connection
1. Connect a LAN cable from WIFI2HDMC to the AP router.
2. Change Virtual AP Bridge to “Bridge to Ethernet” and click “Apply”. Then you can
bridge WIFI2HDMC to Internet.
Note: WIFI2HDMC must connect to an AP router and can’t connect to WAN directly.