StarTech.com WIFI2HDMCGE Manual - Manual (Page 9)

Instruction Manual
5
4. From the Initial Setup menu, modify the following options to suit your application.
Language: Select your desired language for the interface.
TV System: Configure WIFI2HDMC to use a specific resolution if needed. Note: It is
recommended to leave this option as HDMI Auto
WiFi Connection (optional): You may want to connect the device to your WiFi
network for one of the following reasons.
a. Create a network bridge. When your mobile device is connected to the WIFI2HDMC
SSID directly, this option enables you to still browse the internet or access your LAN,
through the WIFI2HDMC device.
b. Enable the WIFI2HDMC to access DLNA servers on your network.
c. Access the WIFI2HDMC remote interface from your LAN instead of a direct
connection to WIFI2HDMC SSID.
Virtual AP Bridge: Select one of the following options.
a. Bridge to Wireless – This will bridge the WIFI2HDMC network with your wireless LAN
so that you can access the internet or LAN devices through the WIFI2HDMC.
b. Bridge to Ethernet– This will bridge the WIFI2HDMC network with your wired LAN so
that you can access the internet or LAN devices through the WIFI2HDMC.
c. Virtual AP only – Devices connected to the WIFI2HDMC network can only access the
WIFI2HDMC device.
Save Change: Saves all changes.