StarTech.com VS420RDVIA - Manual (Page 12)

Instruction Manual
9
Set the Auto Scan Time Interval
Step 1
Press 3 and 4 at the same time.
Step 2
All four LEDs should be blinking. Press one to set the auto scan time interval.
• 1 represents 8 seconds
• 2 represents 15 seconds
• 3 represents 30 seconds
• 4 represents 45 seconds
Reset the Unit to its Default Settings
1. Power off the Video Matrix Switch.
2. Press and hold Option.
3. Power on the Video Matrix Switch.
4. Press 1 to reset everything back to the default settings.