StarTech.com VS420RDVIA - Manual (Page 14)

Instruction Manual
11
5. Press 1 once or twice to adjust the input video strength of the selected port. The
colour of the LED will indicate the strength of the video signal. If it is green, the
normal strength is in use. Red indicates the use of the enhance strength feature.
OR
Press 3 once or twoce to adjust the output current of the selected port. The colour
of the LED will indicate the output current. If it is green, the normal current is in use,
while red indicates the use of the enhanced current.
OR
Press 4 one, two, three, or four times to adjust the output emphasis of the selected
port. The colour of the LED will indicate the output emphasis. If it is green, there is
no pre-emphasis, yellow, low pre-emphasis, orange, medium pre-emphasis, or red
for high pre-emphasis.
6. Once the setting is finished, press Option to exit the settings mode.
Rackmount Kit (Optional)
The following figure shows how to properly attach the optional mounting brackets to
the Video Matrix Switch unit, for use with an industrial standard, 19-inch rack cabinet.