StarTech.com BT2A - Manual (Page 6)

Instruction Manual
3
Hardware Installation
NOTE: Before you begin installation, determine the best method for connecting the
BT2A to your Audio Destination Device. The BT2A allows for Digital Connection via
optical audio (cable not included), and Analog Connection via 3.5mm or RCA audio
(cables included). Check the manual of your audio destination device to determine the
best method for connecting the BT2A.
Digital Connection
1. Connect a Toslink Digital Audio cable (not included) from the Optical Audio Out port
on the BT2A, to the Optical Audio Input on your Audio Destination Device.
2. Connect the included power adapter from an available AC wall outlet to the BT2A.
3. (Optional) If near a USB power source, the included USB power cable can be used in
place of the power adapter. Connect the cable from the USB power source to
the BT2A
Analog Audio Connection
1. Connect the included 3.5mm audio cable from the Analog Audio Out port on the
BT2A, to the 3.5mm Audio Input on your Audio Destination Device.
2. (Optional) If using an RCA audio input on your Audio Destination Device, attach
the included RCA breakout cable to the 3.5mm audio cable on the side of the Audio
Destination Device. Connect the color coded RCA cables to the RCA Audio input on
your Audio Destination Device.
3. Connect the included power adapter from an available AC wall outlet to the BT2A.
4. (Optional) If near a USB power source, the included USB power cable can be used in
place of the power adapter. Connect the cable from the USB power source to
the BT2A