StarTech.com BT2A - Manual (Page 7)

Instruction Manual
4
Hardware Operation
NOTE: Ensure your Audio Destination Device is set to output the audio source that the
BT2A is connected to. Check the device manual for details.
Pairing with NFC Fast Connection
The BT2A is equipped with a standard NFC tag, to allow for NFC pairing. NFC allows
you to connect your Bluetooth Enabled Device to the BT2A by simply by touching the
BT2A with the Bluetooth enabled device. Check the manual of your Bluetooth enabled
Device to determine if NFC is supported.
1. Ensure NFC is enabled on your Bluetooth Enabled Device. Check the device manual
for details.
2. Touch your Bluetooth enabled device to the top of the BT2A for roughly 3 seconds.
NOTE: If this is the first time your Bluetooth enabled device has been paired you
may receive a message requesting access. Accept this message.
3. The devices are now paired, the Pair LED is solid and audio from the Bluetooth
enabled device will output through your Audio Destination Device.
NOTE: Only one device may be paired at a time.
Fast Disconnect from your NFC Enabled Device
1. Touch your paired Bluetooth enabled device to the top of the BT2A for roughly 3
seconds.
2. The devices are now disconnected, the Pair LED begins to blink, and audio will no
longer output through your Audio Destination Device.
Manual Pairing
1. Ensure Bluetooth is activated on your Bluetooth Enabled Device. Check the device
manual for details.
2. Locate the Bluetooth management software on your Bluetooth enabled Device.
Check the device manual for details.
3. A list of devices in range will be displayed. On the list, locate “Music Receiver” and
select the connect option.
4. Your device will prompt for a Pin, enter “0000”, as the pin, and continue with the
connection process.
NOTE: Pin may not be required on some devices
5. The devices are now paired, the pair LED is solid and audio from the Bluetooth
enabled device will output through your Audio Destination Device.
NOTE: More details regarding Bluetooth paring will be available the manual of your
Bluetooth Enabled Device.