StarTech.com 2POSTRACK - Manual

Instruction Manual
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 06/21/2012
For the most up-to-date information, please visit: www.startech.com
5. Mount the legs to the base of the rack and attach them with the
screws and nuts. Use the Allen key to fasten the nuts and screws
and stand the rack up.
6. Using the rackmount screws and cage nuts, install your
rackmount equipment in the 2POSTRACK.
2POSTRACK
42U 2 Post Open Frame Rack with Casters
*actual product may vary from photos
Installation
1. Place the top (part with the DuraRak symbol), bottom, and each
side post of the 2POSTRACK on the ground for positioning of
alignment.
2. When the panels are aligned, the holes should match up with
each other allowing you to use the Allen Key to fasten each
corner with the nuts and bolts provided.
3. Once one side of the 2POSTRACK is fastened please flip the rack
over and follow the instructions in Step 2.
4. Attach the casters, which are included with the packaging, to the
legs of the 2POSTRACK. Use a Phillips screwdriver and screws to
mount the casters to the legs of the unit.
WARNING!
To prevent bodily injury, please ensure that the rack
is installed in a structurally sound environment with a level floor
and that all hardware has been assembled securely, and checked for
stability before loading equipment. When installing equipment into
the rack, start from the bottom of the rack first and move upwards,
keeping the heaviest equipment at the bottom to avoid a situation
where the rack becomes top-heavy.