StarTech.com CABSHF2POSTV - Manual

Instruction Manual
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 05/08/2012
For the most up-to-date information, please visit: www.startech.com
Packaging Contents
• 1 x Shelf Body
• 4 x Mounting Brackets
• 8 x #10-32 UNF, 3/8”L Screws
• 8 x #10-32 UNF Nuts
• 8 x #10-32 UNF, 5/8”L Panel Screws
• 8 x #10-32 UNF Cage Nuts
CABSHF2POST/CABSHF2POSTV
2U Heavy Duty Mid-Mount Fixed / Vented Rack Mount Shelf for 2 Post Racks
*actual product may vary from photos
Installation
1. Locate a suitable location in the rack/cabinet to mount the shelf -
the shelf itself requires 2U of space.
2. If the rack uses square mounting holes, install the included #10-32
UNF cage nuts into the square mounting holes on the posts of the
rack (front and back).
3. Using the #10-32 UNF, 5/8”L Panel Screws, install the 4 included
mounting brackets on either side of your 2 post rack, with the flat
portion of the bracket facing inward
4. Place the shelf into the rack and align the mounting holes on the
sides of the shelf with the mounting brackets that were installed
in the previous step.
5. Use the provided #10-32 UNF, 3/8”L screws and and #10-32 UNF
nuts to secure the shelf to its brackets on both sides.
6. Make sure the screws are properly tightened and the shelf has no
movement before attempting to place anything on the shelf. Be
sure to observe the maximum weight capacity of the shelf.