StarTech.com S3520WU33ER - Manual (Page 10)

Instruction Manual
7
How to Use
Connecting the Hard Drive
Once the enclosure has been attached to a computer, and your RAID configuration has
been set the drivers will install automatically, and the inserted drives will be accessible
as though they were installed within the system.
Prior to using the drive array, it will need to be formatted according to your operating
system requirements. Refer to Initializing the Hard Drive
LED Indicator
The hard drive enclosure offers LED indicators for each drive, so you can monitor drive
activity. The LED will flash while the hard drive is being accessed. Do not remove the
enclosure from the host computer while the LED is flashing, as it could damage the
drive or the enclosure, resulting in data loss.
Disconnecting the Hard Drive
Windows
1. Select the “Safely remove Hardware and Eject Media” icon, located in the task bar.
2. Select the Mass Storage Device from the list that appears.
3. Wait for the message indicating that it is now safe to remove the device.
Note: Removing the connected drive prior to receiving notification that it is safe to
do so, could result in losing or corrupting data stored on the drive. Once the Safe
to Remove Hardware message appears, please disconnect the enclosure from the
computer by removing the USB connection.
Mac OS X
To safely disconnect the attached drive from the host computer, close any windows
listing the contents of the removable drive. Once all windows are closed, click on the
USB storage icon on the desktop, and drag it to the Trash Can icon on the desktop.
Allow 5 seconds before physically removing the enclosure/drive from the computer.