StarTech.com S3520WU33ER User Manual
Page 8
Advertising
Instruction Manual
5
5. Place the front panel back on by placing it over the drive bay, and sliding it
into place.
6. Replace the screw using the Phillips head screw driver.
7. (optional) If using eSATA, connect the the included eSATA cable from an available
eSATA port on your computer system to the eSATA port on the enclosure.
8. (optional) If using eSATA, connect the the included eSATA cable from an available
eSATA port on your computer system to the eSATA port on the enclosure.
9. (optional) If using USB, connect the the included USB 3.0 cable from an available
USB port on your computer system to the USB 3.0 port on the enclosure.
10. Turn on the unit, by Pushing the Power button on the front panel.
Advertising
This manual is related to the following products: