Led indicators, Disconnecting the hard drive – StarTech.com SDOCK2U33RE User Manual
Page 11
Instruction Manual
8
LED Indicators
State
Power
LED
PC/DUP
LED
Source (HDD2)
LED
Target (HDD1)
LED
Blue
LED
RED
LED
Blue
LED
RED
LED
PC Mode; Powered and
Ready
Solid
Blue
Solid
Blue
On
Off
On
Off
PC Mode: Activity on
HDDs
Solid
Blue
Solid
Blue
On
Flashing
On
Flashing
Duplication Mode;
Ready
Solid
Blue
Solid
RED
On
Off
On
Off
Duplication Mode;
Start Duplication
Solid
Blue
Solid
RED
On
Flashing
On
Flashing
Duplication Mode;
Read Error
Solid
Blue
Solid
RED
On
No
change
On
No
change
Duplication Mode;
Write Error
Solid
Blue
Solid
RED
On
No
change
On
No
change
Duplication Mode;
Target too small
Solid
Blue
Solid
RED
On
Off
On
Flashing
The Drive Power/Activity indicators enable you to monitor drive activity. When the
docking station is powered on, the LED will illuminate. While the hard drive is being
accessed, the LED will blink. Do not remove your drive from the docking station while
the LED is flashing, as it could damage to your drive, resulting in data loss.
Disconnecting the Hard Drive
Windows
1. Select the “Safely remove Hardware and Eject Media” icon, located in the task bar.
2. Select the storage device from the list that appears.
3. Wait for the message indicating that it is now safe to remove the device.