Cobra Digital DC4330 - Manual (Page 11)

10
EXIT
Use up and down button to move the pointer to select the desired language and press OK button
to confirm. The sub-menu will close automatically and the setting is saved.
Driver Setting
Digital camera driver: 2 different download methods are
available to download the images from the camera. Use
“ ” or “ ” to move the pointer to select “Driver setting”:
PC CAMERA → Downloading is done via image
manipulation software
MASS STORAGE →Images or files are be copied directly
from or to computer
EXIT →Exit sub-menu
Use up and down arrow button to move the pointer and select appropriate item then press OK
button to confirm. The sub-menu will be closed automatically and the setting is saved.
Self-timer
Use“ ”or“ ” to select“ ”， and use “up” and
“down” button to select “self-timer”. (As per figure-12)
： Start “Self-timer”
： Close: Self-timer
Default mode is set as self-timer closed.
Use “ ” or “ ” button to select icon of menu, and confirm. Submenu will be closed
automatically, and setting is saved.
Switch function key to“ ”， TFT screen will display playback.
1）Display：
Use “left” and “right” key to select“ ” , and press
confirm. Please refer to figure-13 for TFT screen displays.
： Display single picture
： Display nine pictures
Default is
Use “ ” or “ ” button to select icon form menu, and confirm it. Setting is saved. When
reviewing single image , press “OK” button and “Voice record ” alert will be displayed in the
TFT screen . Then it is ready for you to record sound . Press “OK” button to terminate recording
again . Once a voice recording is done , a speaker icon will be shown on the image . To playback
the recorded voice to the image , press “OK” button . Alert of “Playing voice…” will be
displayed in the TFT screen . You can listen the recorded sound by inserting the earphone in the
Audio output of the camera .
5. Playback / review
Figure-11
OFF
Figure-12
Figure-13
LCD
0