Studiologic SL760 User Manual
Page 11
• Caracteristiques generales
30
• Connexiones
30
• Tableau de commande
31
• Programmation
31
• Édition
31
• Canal MIDI (MIDI Channel)
31
• Sélecion de banque (Bank select)
32
• Changement de Programme
(Program Change)
32
• Division du clavier (Split)
32
• Transposition (Transpose)
32
• Sustain
32
• Molettes de contrôle (Wheels)
32
• Aftertouch
32
• Vélocité
33
• Utilisation MIDI
33
• General Reset
33
INDEX
36. Fretless Bass
78. Shakuhachi
121. Guitar Noise
37. Slap Bass 1
79. Whistle
122. Key Click
38. Slap Bass 2
80. Ocarina
123. Seashore
39. Synth Bass 1
81. Square
124. Birds
40. Synth Bass 2
82. Sawtooth
125. Telephone
41. Violin
83. Calliope
126. Helicopter
42. Viola
84. Chiffer
127. Applause
85. Charang
128. Gunshot
SECTION 7.
Appendix:
Keyboard does not power up?
• Make sure the power supply is connected to the wall outlet
• Make sure the power supply is properly connected to the keyboard
Keyboard does not seem to be sending MIDI notes to my modules?
• Make sure you are not in the EDIT MODE.
• Make sure the ZONE switch of the ZONE you are trying to play is on.
• Make sure the MIDI channel you are playing on is enabled on your sound source.
• Make sure your sound modules audio outputs are connected properly to your mixer or amp.
• Make sure your mixer amp or sound system is on and the volume settings are up.
I have made changes in EDIT MODE but the changes do not seem to be present when I
return to PLAY MODE?
• This can happen very easily. When you enter EDIT MODE make sure you are editing the ZONE
•
that you were playing before hitting EDIT. When entering edit mode you will be on the ZONE
•
you last edited not necessarily the ZONE you have on in PLAY MODE.
I know I am sending MIDI to my module because I see the MIDI indicator light up when
I play but I hear nothing?
• Make sure the VOLUME PEDAL is depressed forward to send full volume!
• Make sure your sound modules audio outputs are connected properly to your mixer or amp.
• Make sure your mixer amp or sound system is on and the volume settings are up.
The SUSTAIN PEDAL does not seem to work?
• Make sure it is plugged in properly to the SUSTAIN PEDAL INPUT
• Make sure the SUSTAIN PEDAL is enabled for the ZONE you are playing
The SUSTAIN PEDAL seems to work in reverse?
• Power the keyboard down. With the SUSTAIN PEDAL plugged in to the SUSTAIN PEDAL INPUT
•
power the keyboard up. This will cause the SL-SL-760 to sense the proper polarity setting
•
for the type of pedal you are using and adjust properly.
The WHEELS or AFTERTOUCH do not seem to work?
• Make sure they are enabled on the ZONE you are playing
• Make sure they are enabled in the Patch in your module you are sending to.
I am playing a ZONE that I know is on but nothing is happening?
• Make sure you are playing within the SPLIT range of notes set up for that ZONE
• Make sure that the MIDI channel is set correctly.
• Make sure the VOLUME PEDAL is depressed and all other volume setting are up.
TROUBLE SHOOTING
GUIDE
PROBLEM
POSSIBLE SOLUTIONS
POSSIBLE SOLUTIONS
PROBLEM
POSSIBLE SOLUTIONS
POSSIBLE SOLUTIONS
POSSIBLE SOLUTIONS
POSSIBLE SOLUTIONS
PROBLEM
POSSIBLE SOLUTIONS
PROBLEM
POSSIBLE SOLUTIONS
POSSIBLE SOLUTIONS
POSSIBLE SOLUTIONS
PROBLEM
POSSIBLE SOLUTIONS
POSSIBLE SOLUTIONS
PROBLEM
POSSIBLE SOLUTIONS
PROBLEM
POSSIBLE SOLUTIONS
POSSIBLE SOLUTIONS
PROBLEM
POSSIBLE SOLUTIONS
POSSIBLE SOLUTIONS
POSSIBLE SOLUTIONS
22
I
N
S
T
R
U
C
T
I
O
N
S
M
A
N
U
A
L
®
M
I
D
I
C
O
N
T
R
O
L
L
E
R
S
ENGLISH