Tv installation – rear panel connections – SunBriteTV 4660HD User Manual
Page 11
SunBriteTV Model 4660HD Operator’s Manual
Page 11
TV Installation – Rear Panel Connections
Switching Sources for Ports:
Model 4660HD offers several options when connecting
your devices to the TV. The chart below will help you
understand which source you switch to for each of the
ports.
CONNECTINg TO AN ANTENNA
1. Make sure the power to the TV is turned off.
2. Connect the Coaxial RF cable from your antenna or
digital cable to the Push-on Coaxial Adapter that
was shipped with the TV.
3. Slip on the Push-on Coaxial Adapter and Coax onto
the NTSC/ATSC port on the back of the TV.
4. Turn on the TV.
5. Select TV Air/Cable in the Menu/TV /Tuner mode.
6. Use the On-Screen Display to scan for channels
(Setup/TV/Channel Scan)
Connecting to Digital Cable without Cable Box or Antenna:
Note: For ease of install, SunBriteTV has included a Push-on Coaxial Adapter.
Please Note :
1. Not all broadcasts are in High Definition (HD). Please refer to
your local broadcasting stations for more information.
2. The TV’s tuner is designed for HDTV therefore requires a
stronger signal than normal TVs. If you cannot achieve that
signal level with your antenna or cable, your 4660HD might
lose picture or sound.