SunBriteTV SB-WM46 User Manual
Page 10
SB-WM46
Installation Instructions
10
Cable Management
CAUTION:
Ensure that adequate cable slack exists for
movement of display, and that cables will not be pinched by
installation of covers (G) or screws (R).
1.
Carefully insert cables into cavities located in lower portions
of mount arms. (See Figure 12)
2.
Install each cover (G) with two screws (R). (See Figure 12)
Figure 12
Adjustments
Pitch
1.
Loosen pitch adjustment knob. (See Figure 13)
2.
Tilt display to desired angle (-15° to +15°). (See Figure 13)
3.
Tighten pitch adjustment knob. (See Figure 13)
Figure 13
Extension and Swivel Tension
WARNING:
Excessive loosening or tightening of
adjustment screws can result in serious personal injury or
damage to equipment!
1.
Using hex keys (I, J), loosen or tighten adjustment screws
as required to achieve desired tension. (See Figure 14)
Figure 14
(R) x 8
1
2
(G) x 4
1
-15°
0°
+15°
2
3
9/16" (14.3mm)
1
1