SunBriteTV SB-WM46 - Manual (Page 8)

SB-WM46 Installation Instructions
8
5. Use four removed screws and washers to secure interface
brackets (C or D) to back of display. (See Figure 6)
Figure 6
Install Faceplate Brackets to Faceplate
1. Align faceplate brackets (B) with faceplate (E) and slide into
position. (See Figure 7)
Figure 7
2. Using hex key (H), install four 1/4 x 5/8" button head cap
screws (K) through four 1/4" washers (L), faceplate (E),
faceplate brackets (B), into four 1/4" nuts (M). Tighten
securely. (See Figure 8)
Figure 8
Install Faceplate to Display
1. Align faceplate brackets (B) with interface brackets (C or D),
aligning the middle thumb screw on bottom of display with
the faceplate bolt. (See Figure 9) and (See Figure 10)
Figure 9
5 x 4
(C or D) x 2
(65" model shown)
1
(B) x 2
(E)
2 (M) x 4
(K) x 4 2
7/16" (11.1mm)
(L) x 4
middle thumb screw
faceplate bolt
1