Sunny Health & Fitness SF-RB1117 - Manual (Page 9)

Assembly & Adjustments
EXERCISE MONITOR FUNCTIONS
The 5 function Exercise Monitor is set to start automatically when you
begin to pedal. However, it is possible to switch on the monitor by
pressing the Mode Button at the bottom of the monitor. To save battery
consumption, the monitor will also switch off after it has been idle for
approximately four minutes.
Please refer to the leaflet supplied with the Exercise Monitor for all
operational functions.
LUBRICATION AND MAINTENANCE
The moving parts in your Cycle are all pre-lubricated at assembly and
should not require further attention. We recommend however that the
cycle is used inside and stored in a dry condition. To clean the metal and
plastic components, a general household cleaner can be used, but
please be sure to dry the cycle and any attachments before use. In the
interest of safety, do NOT use polish or any lubricant on the saddle,
foam handgrips or pedals.
Page 8