Superlux C/HD662 Installation Manual User Manual
Page 3
Assembly Instructions for
Desk-top Demo Station Kit for Headphones
1. Please take off the left and right clamps for wire holder (G) and put the screws away, install the Z-shape
wire holders (5) for headphones, and then put everything back in sequence.
2. Unscrew the red fixing base for wire holder (F) in order, put in the straight wire holder(6) of DSK desk-top
type for headphones, screw the straight wire holder on the fixing base firmly, and put the red fixing base
back.
3. Please plug in the headphone at 3.5mm socket (H) at the lower part of the station, as indicated by the
sketch map, pull the headphone plug through the anti-theft hole(I) and then lock the cable into the notch.
Please assemble all the headphones displayed on this station in the same manner.
4. Please put the panel plan (9) back in accordance with the headphones in display.