Superlux C/HD662 Installation Manual - Manual (Page 5)

1. Please take off the left and right clamps (G) for wire holder and put the screws away, install the Z-shape
wire holders (7) for headphones, and then put everything back in sequence.
2. Unscrew the red fixing base (F) in order, put in the straight wire holder (8) of DSK wall-mount type for
headphones, screw the straight wire holder on the fixing base firmly, and put the red fixing base back.
4. Unscrew the anti-theft socket (K) and fix the screw hole for wall-mounting(L) at the screws on the wall
and pull the station downward to position it safe and then screw the anti-theft socket.
5. Please place the panel plan in accordance with the headphones in display.
3. Please plug in the headphone at 3.5mm socket (K) at the lower part of the station, as indicated by the
sketch map, pull the headphone plug through the anti-theft hole(I) and then lock the cable into the notch.
Please assemble all the headphones displayed on this station in the same manner.
Screws on
the wall
Assembly Instructions for
Wall-mount Demo Station Kit for Headphones