Crestron electronic CEN-iServer - Manual (Page 6)

Crestron iServer™ Network Audio Server Crestron CEN-ISERVER
Ear Attachment for Rack Mounting (this image shows a 1RU device)
USE COVER SCREWS
2. Connect AUDIO OUT to amplifier, receiver, or audio distribution system.
Make connections via RCA (L and R), CAT5 (CH), or both.
AUDIO OUT Port
3. If video is to be delivered from the CEN-ISERVER, select either composite
or component video. Connect the appropriate output (YPbPr or COMP)
and/or the CH output to a receiver or video distribution system.
VIDEO OUT Port
4. Connect the LAN port to the local area network.
LAN Port
5. Connect the GROUND to earth ground.
6. Connect the iPod. Close and secure the drawer. For details, refer to “Secure
the iPod” on page 12.
iv ¥ Crestron iServer™ Network Audio Server: CEN-ISERVER Operations Guide – DOC. 6759B