Sure Heat 2009 Surefire SF34LP - Manual (Page 5)

UNPACKING INSTRUCTIONS
ASSEMBLY REQUIREMENTS
Parts Supplied
View of Unassembled Grill Parts
Using a utility knife, cut the tape to open the top flaps of the 1.
carton.
Remove the Assembly/ Installation Instructions and Use and 2.
Care Guide.
Remove the cardboard panel on the top. Remove the corner 3.
supports on the top of the inside of the carton. Remove the
foam from the two sides
Remove the cart base panel from the top and remove all the 4.
parts along the front and sides of the carton.
Remove the bread warmer, the rotisserie spit, and spare tank 5.
barrier bar
Remove the foam packaging from the top and sides of the 6.
grill head assembly.
Remove the four corner supports from the inside of the 7.
carton.
Using a utility knife, cut along the vertical dotted cut lines 8.
located on 2 sides of the carton. Lay the box sides flat.
Using two or more people, remove grill head assembly from 9.
carton with the foam underneath the grill assembly.
Remove the plastic bag from the grill head. 10.
Excessive Weight Hazard
Use two or more people to move and install grill.
Failure to do so can result in back or other injury.
11. Remove screws (with hang tags attached) located on either
side of the grill head.
Open hood remove and open the box which contains the grill
12.
component parts. Remove all packaging materials and
set component parts aside.
Remove wrapped flavor grids from top of box. Open box and
13.
remove contents, then set aside.
Dispose of/recycle all packaging materials.
14.
A. Grill hood assembly
B. Bread warming rack
C. Main burner grates
D. Flavor grids
E. Side shelf
F. Side burner shelf
G. Drawers
H. Cart door right
J. Cart left
L. Cart back
K. Cart right
M. Cart base
N. Drip pan
Not shown:
Package of small components
A
B
C
D
E
G
H
I
J
K
L
M
P
O
F
5
N
Q
R