Chicago Electric WELDING SYSTEMS 91214 - Manual (Page 4)

Page 4 For technical questions, please call 1-800-444-3353. Auto-darkening
Welding Helmet
Do not make any modifications to •
either the Auto-Darkening Filter or
the rest of the helmet, other than
those specified in this manual.
Do not use any replacement parts
other than those specified in this
manual. Unauthorized modifications
and replacement parts will void the
warranty and expose the user to the
risk of personal injury. Do not open
or tamper with the Auto-Darkening
Filter.
Do not place the Welding Helmet’s 16.
Auto-Darkening Filter on a hot
surface.
SEVERE pERSONAL INjURY
17. and/
or bLINDNESS may occur if the user
fails to follow the aforementioned
warnings and/or fails to follow the
operation instructions.
WARNING
INHALATION HAzARD:
Welding and plasma cutting produce
TOxIc FUMES.
Exposure to welding or cutting exhaust
fumes can increase the risk of developing
certain cancers, such as cancer of the
larynx and lung cancer. Also, some
diseases that may be linked to exposure
to welding or plasma cutting exhaust
fumes are:
• Early onset of Parkinson’s Disease
• Heart disease • Ulcers
• Damage to the reproductive organs
• Inflammation of the small intestine or
stomach • Kidney damage
• Respiratory diseases such as
emphysema, bronchitis, or pneumonia
Use natural or forced air ventilation and
wear a respirator approved by NIOSH to
protect against the fumes produced to
reduce the risk of developing the above
illnesses.
SpEcIFIcATIONS
Model 91212 91214 94336 94337
Shell Designs Blue Flames Eagle Skull
Power Source
Solar Cells
(rechargeable battery included,
no additional battery required)
3V CR2450 battery
(lifetime ~6,000 hours)
Viewing Area 3.86” x 1.73” 3.74” x 2.44”
Operating Temp. 23 to 158° F 14 to 158° F
Clear State 4 DIN 3.5 DIN
Weight 1.3 lb. 1.6 lb.
Shade Range 9 to 13
Ultraviolet / Infrared Protection up to shade 16 all the time
Welding Protection Types
For All Arc Welding Processes;
Not for Laser Welding or Oxyacetylene Welding/Cutting
Shell Material High Impact-Resistant Plastic Polyamide Nylon
Lens
Switching Speed (Clear to Dark): 1/25,000 second
ANSI Z87.1-2003 - approved Lens
Power ON / OFF Fully Automatic
Storing Temperature -4 to 158° F
REV 06l; 09e; 09h; 10c