Crimestopper Security Products RS-00 - Manual (Page 4)

4
WIRING
YELLOW BLACK FOR NEGATIVE IGNITION OUTPUT: (Relay and/or Module not included )
YELLOW/BLACK
85 86
30 87
3rd IGN
(If needed)
IGN SW.
OR
ANTI-THEFT/
MODULE
+12V CONSTANT
OR
TRANSPONDER
Diode isolate
if using both!
ANTI-GRIND/STARTER DISABLE OUTPUT: (Relay not included)
TO
IGN 2 ENGINE
ACC
START
CUT
BROWN
YELLOW/BLACK 86 85
MAKE CERTAIN TO CONNECT "BROWN" START OUTPUT WIRE TO
STARTER SIDE OF ANTI-GRIND/START DISABLE RELAY.
IGN 1
MAKE SURE 86 TERMINAL HAS POWER WITH IGNITION ON AND CRANK
IGNITION
SWITCH