Wireless transmitter battery replacement, Transmitter battery kit, Required tools – SUUNTO D9tx User Manual
Page 114: Replacing the transmitter battery, 115 9.2.2. required tools, 115 9.2.3. replacing the transmitter battery
9.2. Wireless transmitter battery replacement
NOTE
It is advisable to contact an authorized Suunto service center
for transmitter battery replacement. It is imperative that the
change is made in a proper manner to avoid any leakage of
water into the transmitter.
9.2.1. Transmitter battery kit
The transmitter battery kit includes a 3.0 V CR ½ AA lithium cell battery and a lubricated
O-ring. When handling the battery, do not make contact with both of the poles at the
same time. Do not touch the metal surfaces of the battery with your bare fingers.
9.2.2. Required tools
•
A Phillips-head screwdriver
•
Soft cloth for cleaning
9.2.3. Replacing the transmitter battery
To change the transmitter battery:
1.
Remove the transmitter from the regulator HP port.
2.
Unscrew and remove the four Phillips screws on the back of the transmitter.
3.
Pull off the transmitter cover.
4.
Carefully remove the O-ring. Be careful not to damage the sealing surfaces.
5.
Carefully remove the battery. Do not touch the electrical contacts or the circuit
board.
115