Casio fx-9750G PLUS User Manual
Page 194
166
u
u
u
u
u
To check the on/off status of a pixel
[Sketch]-[Test]
While the sketch menu is on the screen, press 6 (g) 6 (g) 4 (Test) and then
input the command shown below to check the status of the specified pixel. 1 is
returned when the pixel is on, and 0 is returned when the pixel is off.
PxlTest <line number>, <column number>
• Specify a line in the range of 1 to 63 and a column in the range of 1 to 127.
• Trying to perform one of the above operations without specifying a line and
column number results in an error.
• Pixel operations are valid only within the allowable line and column ranges.
k
k
k
k
k
Clearing Drawn Lines and Points
[Sketch]-[Cls]
The following operation clears all drawn lines and points from the screen.
u
u
u
u
u
To clear lines and points in the STAT, GRAPH, TABLE, RECUR and
CONICS Modes
Lines and points drawn using sketch menu functions are temporary. Display the
sketch menu and press 1 (Cls) to clear drawn lines and points, leaving only the
original graph.
u
u
u
u
u
To clear drawn lines and points in the RUN or PRGM Mode
The following is the syntax for clearing drawn lines and points, as well as the
graph itself.
Cls
10 - 2
Graphing with the Sketch Function