TC-Helicon VoiceLive Play Details Manual - Manual (Page 3)

3
How Do I Use This Thing?
The following section gives some examples of how you might use the VoiceLive Play . Of course, every
setup is different and you may find another way of doing things that works better for you!
I’ve got nothing… just a VoiceLive Play and some headphones!
1 . Press Setup and navigate to the INPUT page .
2 . Choose VOICE from the ROOMSENSE menu .
3 . Press BACK .
4 . Plug in your headphones .
5 . While singing, press MIX and adjust the HEADPHONE LEVEL until it’s as loud or soft as you
like it.
6 . Press BACK .
7. Use the Control Knob to navigate through presets. Try HIT!
I’ve got a microphone, headphones and an acoustic guitar, electric
guitar with an amplifier, acoustic piano or electric piano with
speakers…
1 . Press SETUP and navigate to the INPUT screen .
2 . Choose your mic type from the INPUT menu .
3 . Select AMBIENT/AUTO from the ROOMSENSE menu .
4 . Press BACK .
5 . Plug in your Mic
6. While singing, adjust the Mic Knob until the input LED lights GREEN (yellow is ok, but don’t let
it get red and angry)
7 . Plug in your headphones .
8 . Sing into your mic and play your guitar/piano .
9. Press MIX and adjust the ROOMSENSE and HEADPHONE level to get a nice blend between
your voice and instrument .
10 . Press BACK .
11. Use the Control Knob to navigate through presets. Try some presets with harmony. The Room
Sense mics will pick up your instrument sounds and figure out which key the song is in!