How do i use this thing – TC-Helicon VoiceLive Play Details Manual User Manual
Page 4
4
I’ve got a mic, PA system and play with a band. I’d like the harmonies to be in
key automatically…
1.
Follow steps 1-6 above.
2.
With your PA output levels turned off or waaaay down, connect XLR cables from the OUT-
PUT of the VoiceLive Play to input(s) on your mixer .
3 .
Press MIX and turn the ROOMSENSE level all the way OFF .
4 .
Press BACK .
5.
While singing, slowly raise the level of the PA system until it’s at a level that works well with
the rest of the band.
6.
Use either the Control Knob or Up and Down footswitches to select presets. Try HardTune
or Harmony presets and the Play will figure out the key the band is playing in. If it’s having
trouble, try placing the Play closer to a chord based instrument or its’ amp, like guitar or key-
board… or keytar…epic!
I want to sing along, Karaoke style, with my mp3 player or through
my computer .
For an mp3 player, connect your device to the AUX input with a 1/8th inch cable.
For computer output, connect the VoiceLive Play to your computer with the supplied
USB cable.
a .
Locate your Audio Control Panel .
b.
Set VoiceLive Play as the default output device.
c .
Hit Apply .
d.
Since computer systems vary wildly from user to user, we suggest looking up information on
your particular operating system or computer manufacturer to get further assistance directly .
Forums are a good place to check, along with manufacturer knowledgebase systems.
1 .
If you want to use the Vocal Cancel feature to remove the lead vocal:
2 .
Press Setup
3 .
Navigate to Page 2 (OUTPUT)
4.
Press the blue “soft button” next to VOCAL CANCEL
5.
Use the Control Knob to change the setting to ON
How Do I Use This Thing?