TC-Helicon VoicePro - Manual (Page 67)

67
Section 7: Optimizing Hybrid TM Pitch Shifting
2.Navigate to the Pitch Mode Tab. Use the Edit Knobs to
select "Pitch Shift" for the mode parameter.
3.Set the Pitch quality parameters within the guidelines
below:
4.Navigate to the Pitch Shift Tab and select a large down-
shift using the Coarse or Fine Shift parameters.
5.Modify the Pitch parameters above based on their
ranges to further tune the shift.
Emulating the sound of other shift-
ing algorithms
By setting the Pitch parameters to the correct values, you can
emulate the sound of a PSOLA or Instrument shifter.
1. Select or create a preset that only has the Pitch block
enabled, and the VirtuaLead Level set to "0dB", and dry and
harmony turned off
2. Navigate to the Pitch Mode Tab. Use the Edit Knobs to
select "Pitch Shift" for the mode parameter.
3. Set the Pitch quality parameters within the guidelines below:
4.Navigate to the Pitch Shift Tab and shift using the Coarse
or Fine Shift parameters.
Parameter
Modeling Optimization
Formant Correct Amount
Formant Offset
UV Shift Attenuation
UV Shift Amount
Downshift Quality +2 to +12
Off or On
Auto
0
0
Auto to 20
0
+12 to +36
Off or On
Auto
0
20 to 60
20 to 100
0 to 50
Shift Interval
Parameter
Modeling Optimization
Formant Correct Amount
Formant Offset
UV Shift Attenuation
UV Shift Amount
Downshift Quality PSOLA
Off
100
0
0
0-100
0
Instrument
Off
0"
0
0
100
0
Shift Interval