TeeJet LH 500 - Manual (Page 13)

LH 500 C OMBINE MONITOR OPERATORS MANUAL O PERATION
OPERATION
COMBINE INFORMATION SCREEN
When the combine information key is pressed (pos. 1) the following information is
displayed:
Chopper speed Thresher speed Fan speed
Grain elevator speed Return elevator 1 speed Return elevator 2 speed
Straw walker speed Feed auger speed Reel speed
All of the above speeds are shown as RPM.
THE USER SELECTABLE FUNCTIONS
Pressing one of the user selectable function keys (pos. 8). The available functions
are described in the following:
AREA FUNCTIONS
Key Description
Pressing the Area function key displays the following area functions:
Ha/H:
The current area being covered per hour. This is
calculated from the current working width and present
forward speed.
Ha:
The total measured area since the start of the task or
since the last reset. See “Data/Delete” on page 19.
Ha-left:
The area remaining in the field. This is the encoded
area left (see page 17) minus the area covered so far.
Pressing any one of the above keys will show the function in the top
right-hand side of the display.
LH A GRO 13