Cavalry Storage CADT-SA2 - Manual (Page 10)

SATA Users
: If you do not already have an eSATA interface on your
computer, first install the bracket when the computer is off. Then use the
eSATA cable to connect the drive to the bracket. Turn on the unit then turn on
the computer. (Please note that SATA is not required to use your product.)
Step 4.
Turn the power switch on.
NOTE:
Connect the USB cable to the drive before connecting the cable to
the computer. To disconnect, remove the cable from the computer first.
11 10
USB Cable Plug
USB Port Fig. 2
Fig. 3