Cavalry Storage CADT-SA2 - Manual (Page 24)

Cannot use SteelVine (GUI) software
Please confirm that your "0-7 Settings Dial" is set to "7." Follow instructions
on page 17 to change the dial to 7 if necessary.
Drive will not work with my PC
You may have to reformat to NTFS by following the "Formatting Guide" found
in the Resources CD or at www.cavalrystorage.com/su_download.htm
I reformatted with Mac OS 10.5 and the drive does not work
Mac OS 10.5 formatting does not work with the RAID hardware. If you have
Mac OS 10.5 and reformatted, you need to contact Cavalry customer support.
If you have more questions, please refer to the Frequently Asked
Questions
section online at: www.cavalrystorage.com/su_faq.htm. You may
also contact Cavalry tech support at [email protected].
25
24