TeeJet LH 500 - Manual (Page 10)

D ATA /D ELETE LH 500 O PERATORS M ANUAL & F ITTING I NSTRUCTIONS
10 LH A GRO
DATA/DELETE (TASK)
It is possible to have up to ten different trip counter sets (tasks) that can be started
and stopped when, e.g. changing fields.
The task menu is selected from the main menu (press the MENU key).
Press hereafter the ARROW UP and ARROW DOWN keys to mark “Data/delete”.
Press the ENTER key.
When starting a new task all the counters are zeroed. If another task is selected
and then the original task is selected again the counters will continue with the
same values from when the task was stopped.
The tasks can be reset one by one.
THE COUNTERS IN A TASK
New counter
Clear counter
Area (Ha) 0.00
Distance (m) 0
Time 0:00:00
Trip counter 1/10
The screen to the left is displayed
when the “Data/delete” menu is
selected.
A description of each individual
counter follows:
Area (Ha):
The measured area since the start of the task or since the last reset. The area
measured is the effective area, so only the area that has been worked is counted.
Distance (m):
Distance in metres (effective distance) since the start of the task or since the last
reset. How the distance counter is started and stopped is dependant on the
Auto/Man function (see page 6).
Time:
The total time used since the start of the task or since the last reset. How the time
counter is started and stopped is dependant on the Auto/Man function
(see page 6).