TeeJet LH 500 - Manual (Page 9)

LH 500 O PERATORS M ANUAL & F ITTING I NSTRUCTIONS O PERATING THE LH 500
LH A GRO 9
THE USER SELECTABLE FUNCTIONS
Symbol Description
PTO speed:
The speed of the PTO axle shown as RPM (presupposes that a RPM
sensor is fitted to the PTO shaft).
Distance:
The driven distance since the last reset (see page 10).
The measured distance is displayed in metres until 9999 m.
The distance is displayed as km thereafter (-99.99, -999.9, -9999).
”Km” is shown in the symbol instead of ”m” when the distance
displayed changes to km.
The distance counter is started and stopped according the Auto/Man
function (see page 6).
Ha Left:
Area remaining.
If the size of the field has been encoded before start the area
remaining can be seen (The field size must be encoded before start,
see page 12).
Stop watch:
Used to measure the time for a particular job.
Time measurement is started and stopped according the Auto/Man
function (see page 6).
Ha/hour:
Working efficiency.
How large an area is being worked per hour with the current working
width and the present forward speed.