Fieldpilot, Ih g j, Kj g j p – TeeJet FieldPilot Install Case 71x0-72x0-89x0 User Manual
Page 15
13
FieldPilot
®
98-05107 R2
assembly. Connect the short hydraulic hose
(P)
between the top elbow fitting
(H)
on the load sense shuttle
assembly and the steering orbital load sense fitting.
Figure 1-11: Installing the Tractor Load Sense Shuttle Adapters
i
H
G
J
B. Steering Orbital on the Front Side
Pre-assemble the load sense shuttle
(G)
with the adapters provided
(J)
and
(K)
as illustrated in Figure 1-12.
Locate the tractor load sense hydraulic hose on the front of the steering orbital as illustrated. Remove the tractor
load sense hydraulic hose from the steering orbital and install the elbow adapter
(L)
to the load sense port on the
steering orbital as illustrated. Attach the center position
(K)
of the assembled load sense shuttle to the tractor
load sense hose. Install hose
(P)
to the elbow adapter
(L)
installed at the orbital and to the end of the load sense
shuttle
(J)
.
Figure 1-12: Installing the Tractor Load Sense Shuttle Adapters
K
J
G
J
p